![[公司徽标图象]](_borders/huxu.JPG){kind=small}
|
|
[Home] [About Us] [Product Introductoins] [Directions for use] [Contact Us] [Wanted Information] Choice: medium—vapour:
requiring rotate speed less than 100R per minute(pressure less than 1.8mpa),you
should use style Q. medium—vapour:
requiring rotate speed between 100R per minute and 500R per minute (pressure
less than 1.8mpa), you should use style D. medium—water,air:
requiring rotate speed less than 1000R per minute(pressure less than 1.0mpa),
you should use style H. medium—heat oil:
requiring rotate speed less than 100R per minute(pressure less than 2. 5MPa and
temperature lower than 250°C), you should use style QT. Installation (click
here to read installment directions): 1.
Before installing, please use condensed air to clear the impurity
in the stove-jar. 2.
While connecting the thread of a screw,rotaty unions must be installed
concentricly with
bake oven until
rotating fully. 3.
when the medium is vapour or hot oil, please use high-temperature seal
glue before installing. 4.
The lewis hole on
the rotary unions should be hanged separately and speare some leeway for
buffering. Do not connect several rotary unions together. 5.
After installing, pleas let your engine workwithout
medium for 10 minutes so that the rotary unions can be better functioned Maintaince: 1.
If there is a lubricating
nipple on the rotary unions, you should add lubrication regularly(every 15 days) 2.
When the obturator
is
out of work, please replace it. Ordinary graphite
should be replaced once a year. Graphite with antimony,
ceramic circle and harden alloy should be replaced every 3 year. 3. If you have any questions, please dial hotline for customers: 13901958922 .Our technicians will offer home-service for you as soon as possible.(Within 24 hours if you live in the east of China)
linkman: Shen Shaode call:13901958922
|
|
|